Winzer-Service Messe 2019
We will be exhibiting on 27th and 28th November 2019 at the Winzer-Service Messe in Karlsruhe. At the trade fair for winegrowing, fruit growing and distillery you will find us in hall 2: E / 14.

expoSE 2019
Visit us at expoSE, Europe’s leading fair for asparagus and berry production. This will take place from 20th to 21st November 2019 in the Karlsruhe Exhibition Center. You will find us in hall 1-A11.

AGRITECHNICA 2019
We will be exhibiting at the AGRITECHNICA, the world’s leading trade fair for agricultural machinery, in Hannover, from 10th to 16th of November (Preview days 10/11 November). You will find us in hall 8 booth D03.

Merlin release – Version 3.32
In the new version, we have focused on a new feature
+ Merlin now supports testing of cable harnesses. For this purpose, a special board is inserted into the Takaya, on which both ends of the wiring harness are plugged. Merlin generates the required test steps
+ In the test specification, a test can now be created based on a gate name pattern
+ Merlin now saves the state of the Merlin Explorer
+ Some bugs have been fixed; including a memory leak, which occurred when hundreds of packages got opened

Successful trade fair appearance at the Agrartage Nieder-Olm
Our fair appearance on the Agrartagen in Nieder-Olm from 21.02.2019 – 25.01.2019 was a complete success. CleverSpray won the prize for sustainability in viticulture.
Report in “Allgemeine Zeitung”
Report in “Landwirtschaftliches Wochenblatt”

FRUIT LOGISTICA
We will be exhibiting at the FRUIT LOGISTICA in Berlin from the 6th to the 8th of February. You will find us in Hall 7.1c Stand A-07

Agrartage Nieder-Olm
Visit us at the Agrartage 2019 in the Ludwig-Eckes-Halle in Nieder-Olm from the 21st to 25th of November 2019. You will find us in Hall C Stand C 006.

EIMA International
Successful trade fair presentation at EIMA International.

INTERVITIS INTERFRUCTA HORTITechnica
Our trade fair presentation at INTERVITIS INTERFRUCTA HORTITechnica.

INTERVITIS INTERFRUCTA HORTITechnica
Visit us at the fair for technology for wine, fruit juice and special crops in Stuttgart from from 4th to the 6th of November. You will find us in Hall 10 Stand 10 / E59

EIMA International
Visit us from the 7th to the 11th of November at the International Exhibition of Agricultural Machinery and Horticulture in Bologna. You will find us in hall 30 booth D/3

Interpoma
We will be exhibiting at the Interpoma, the international exhibition for the cultivation, storage and marketing of the apple, in Bolzano, from 15th to 17th of November. You will find us on booth C18 / 64

Merlin release – Version 3.31
In addition to the elimination of minor errors, the new version 3.31 again includes a variety of new features and improvements.
+ An ASCII export has been integrated for VISCOM (extra license required)
+ Via the BOM import sub types of gates can now be assigned directly.
+ Improved algorithm for automatic calculation of bounding boxes
+ In the network pin assignment, the test points are now directly visible

The ‘CleverSpray’ app goes into production at inovel
Report of the project transfer of the Worms University of Applied Sciences to inovel.
(das deutsche weinmagazin – 25. August 2018)

With ‘BigApple’ to less bearing losses
Report of the joint project ‘BigApple’.
(Obstzeitschrift POMA August 2018)

CleverSpray – University of Worms
The series product CleverSpray, control unit with App for plant protection equipment (special cultures) was presented to the press at the University of Worms.
The pre-development of the Wine-Growing App was started by the Worms University (Prof. Dr. Ruhland) in coorperation with winemaker Richard Grünewald in 2014. br>
Picture by Eva Grünewald i>

Hybridmodem development with Telespazio VEGA Deutschland GmbH
Report on Hybrid Development with Telespazio VEGA Deutschland GmbH.
(ECHO ONLINE / ECONOMY / ECONOMY SOUTH HESSEN)

Smart- and CleverSpray at Technology Day in Krasnodar (Russia)
Presentation of Smart- and CleverSpray at Technology Day in Krasnodar Russia.
More than 120 guests followed the interesting lectures. There were more than 80 companies representing a total of 25,000 ha of fruit cultivation.

SmartSpray in Kazakhstan
First machine equipped with SmartSpray in Kazakhstan.

SmartSpray at Technology Day in Kazakhstan
Presentation of SmartSpray at Technology Day in Kazakhstan.
More than 50 guests followed the lectures and live demonstrations in the facilities.

Merlin release – Version 3.30
The new version contains several improvements
+ It is possible to add additional component libraries. This is handy for all Merlin customer with a lot of provided components
+ The Library Mapping storage node may be defined for automatic processing
+ LOC information can be set within the test template, now
+ Performance of PDF viewer and TestRestult view to handle big project has been improved significant

SmartSpray in Russia
Large agricultural company in Central Russia invests in six sprayers with SmartSpray including Automatic Section Control (savings potential> 25%).

Merlin release – Version 3.29
The main focus in this version had been the improvement of Merlin repair.
+ We added a new function so for each step a new status may be added
+ The repair view is completely reworked
+ It is possible to highlight device and net at the same time
+ Ticket search improved
There are serveral more changes for merlin, too.
+ The case collision filter for needle access has been improved.
+ More comments will be written into the CA9

We thank all our partners, customers and visitors!

Agritechnica 2017
Successful exhibition at the Agritechnica

productronica 2017
productronica | World’s Leading Trade Fair for Electronics Development and Production
November 14 – 17, 2017. Hall A1 / Booth 239.

Merlin release – Version 3.28
In this version we provide two frequently requested improvements.
1. We revised the test result view. What did we do? We separated the status column into a status and redundant column. We added an accurate status summary and improved the status colors.
2. We provide the possibility to add wildcards (* or ?) for net references. This will help all customers with a complex net naming pattern. Before it was only possible to define a start sequence and assign a corresponding net type. Now it is possible to add *VCC* as power net but *V?C* as ground net by adding your own order.
More changes:
+ export all tests even if they are redundant (new feature)
+ export pin coordinate with only one needle, like calculated
+ task view doesn’t require access point calculation anymore if not necessary
+ remove do not test from test column in coverage report

Merlin release – Version 3.27
This new Version provides a new function to improve the calculated access point position.
The function is a combination of the existing minimal access point dimameter and a new preferred distance to pad border. The algorithm tries to optimize the distance between boarder and access point to the given preferred distance. But at the same time we still able to create an accesspoint based on the minimal diameter on small areas.
For Merlin repair a new PDF Viewer option is available.

2. Winzer Service Messe
Wir stellen in Halle 2 Stand E/17 aus.

Agri Technica 2017
Besuchen Sie uns in Halle 8 Stand D02
12. – 18.11.2017 (Exklusivtage 12./13.11.2017)

SmartSpray
Neu ab Software Version 3.10
“Row Guide”
Navigationsunterstützung ohne GPS!
Mit “Row Guide” gehören unbehandelte Reihen der Vergangenheit an.
Egal ob Sie jede zweite, dritte oder vierte Reihe behandeln, “Row Guide” informiert in welche Fahrgasse eingefahren wurde!!
Nur in Kombination mit automatischer Teilbreitenschaltung!

SmartSpray at B.O.T.T
visit us at the Bodensee Obstbau Technik Tag
Oberdorf, July 22nd, 2017

Merlin release – Version 3.26
In this version we do have an extension for a summary BOM to recognize groups like C14-C17,C21-C23 and to covert them during the import to C14, C15, C16, C17, C21, C22, C23.
Additionally we focus on improving access point location and access point calculation performance. The diagram show how we have improved the performace over the last versions for different projects.

Merlin release – Version 3.25
The highlight in this version is a new feature to change the bounding box within the CAD-Viewer and Package-Viewer in only one dimension. Just switch into the bounding box edit mode and during the mouse move to editthe bounding size press either “SHIFT+X” or “SHIFT+Y” to only change one dimension. Pressing only “SHIFT” will keep the image ratio as before.

SmartSpray and SmartPilot at Interpoma
International trade show for the cultivation, storage and marketing of the apple
Bolzano, Italy november 24 to 26, 2016
inovel systeme AG with Braglia Srl at Booth C18/64

Merlin pro SMT Hybrid Packaging
SMT Hybrid Packaging is Europe’s leading event on System Integration in Micro Electronics. Nuremberg, 26. – 28. April 2016
Meet us at the booth of SYSTECH Europe GmbH Hall 7A Booth 514

Laurin
Laurin-Software für die Mitgliederverwaltung von Vereinen und Verbänden
In Zusammenarbeit mit mehreren Kreisverbänden des Deutschen Roten Kreuz
haben wir Laurin entwickelt. Laurin ist ein effizientes Software-Tool zur komfortablen Mitgliederverwaltung.
